Alcatel-Lucent OS6450-24 User's Guide Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
Installing External PoE Power Supplies
The following external power supplies provided PoE and backup system power for OmniSwitch 6450
PoE-ready switches:
PS-550W-AC-P (OS6450-P24)
PS-900AC-P (OS6450-P48)
These power supplies may be rack mounted above or below the chassis for a 2RU configuration. The
following sections describe how to rack-mount a power supply shelf and connect the power supply to the
chassis with a cable.
Rack Mounting Power Supplies
1 Align the threaded holes in the provided rack-mount flanges with the two holes in the power supply
shelf. These holes are located on the left and right sides of the shelf.
2 Attach the flanges to the chassis using the provided Phillips-head screws. The screws slide through the
non-threaded holes from the inside of the power supply shelf and are then attached to the mounting brack-
ets using the threaded holes. Be sure to tighten each of the screws firmly using a Phillips screwdriver.
3 Carefully slide the power supply on to the power shelf and secure the power supply to the shelf using
the captive screws.
4 After the rack-mount flanges and the power supply are secured to the shelf, mark the holes on the rack
where the shelf is to be installed.
Captive Screws
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 141 142

Comments to this Manuals

No comments