Alcatel-Lucent OS6450-24 User's Guide download pdf (Page 122)

Avoiding Split Stacks

The term “splitting” a stack refers to the creation of isolated modules within the virtual chassis. A split

stack can result from the following conditions:

• Two or more non-adjacent switches are reloaded simultaneously

• The stack is reloaded without a redundant stacking cable connection

The sections below offer simple guidelines for avoiding splitting the stack during the reload process.

Do Not Reload Non-Adjacent Switches Simultaneously

If non-adjacent switches in the stack—for example, the top switch in the stack and the third-from-top

switch in the stack—are reloaded simultaneously, a problem will occur. The switch between the two non-

adjacent switches will become isolated and the virtual chassis will be effectively split.

To avoid splitting the stack, do not reload the two non-adjacent switches simultaneously. Instead, simply

reload the top switch first, then reload the third-from-top switch, or vice-versa.

Be Sure a Redundant Stacking Cable is Installed at All Times

Another important guideline for avoiding split stacks involves the redundant stacking cable. In order to

avoid isolated modules within the virtual chassis, simply make sure that a redundant stacking cable

connection exists between the top-most and bottom-most switches at all times.

For more information on the redundant stacking cable connection, refer to page 6-18.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 141 142

No comments

Alcatel-Lucent OS6450-24 User's Guide Page 122